Vinyl Decking

Vinyl Decking That Lasts a Lifetime!

A Vinyl Deck that's Maintenance Free, Skid Resistant & Warrantied For Life!

Simple yet secure installation
No rotting, warping or splintering
Never needs sealing, staining or painting
Skid resistant surface
Remains cool to the touch
Enhanced safety - no popping of screw or nail heads
Existing deck substructures may be of sufficient strength and in sound enough condition to enable replacement of worn wood boards with our vinyl planks
Complements our railing system
Lifetime, non-prorated limited warranty

3 Colors To Choose From

Tan
White
Gray

Reproduction of the color shown may vary depending on screen resolution settings. Before making final selection, request color sample.

Easy Installation

Once the base structure is in place, our vinyl deck can be installed in three easy steps.

1. Line up Deck Planks and screw into place, similar to a wood board.

2. Snap Deck Fill Pieces into place. Fill pieces even out the surface while concealing the screws.

3. Slip Deck End Covers over exposed deck plank ends. End covers provide a smooth, finished edge.

Vinyl Deck Components Specifications and Pricing

When ordering your vinyl decking, remember that all deck planks (1) include the snap deck fill pieces (2). All decks are available in white, tan and grey with 10 , 12 & 16 foot lengths.

Plank Size

Colors

Price / Ft.

10'

12'

14'

16'

18'

20'

White

$3.45

N / A

$41.40

N / A

$55.20

N / A

Colors

$3.80

N / A

$45.60

N / A

$60.80

N / A

The vinyl deck plank height is 1 - 1/2" x width 5 - 1/2" with an assumed spacing of 1/8". Joist Spacing should be 16" on center.

To calculate the total square footage that may be obtained from the purchased planks, divide your linear feet by 2.18.
Ex. 32 (linear feet) / 2.18 = 14.67 sq. ft)

If you already know the amount of square feet you need, but wish to know how many planks you need, please apply the following calculation.( Total Sq. Ft. (multiplied) by 2.18 ) divided by (# of feet in plank) = number of planks needed.
Ex. (( 400 sq ft (multiplied by) 2.18 = 872 linear feet ) divided by 10 (plank size)) = 88 (10 foot) planks.

Vinyl Deck Accessories and Pricing

The following deck accessories are available to complete your vinyl decking project. Deck End Covers (3) are available in 12 foot lengths with a selection of white, tan or grey as your color. We also offer special decking screws and end cover fastners for your convenience.

Vinyl Deck End Covers	12 ft section	Deck Screws
white	$12.94 / section	$17.77 / box of 100*
tan / grey	$14.23 / section

* Please note that you need 1 screw per every 1.5 linear feet.